The McLaren’s P2 Ceramic Coating is an exclusive, professional grade, single stage Ceramic Coating
system. It allows professionals to deliver unrivaled gloss levels, extreme hydrophobic effect,
enhanced surface slickness and mesmerizing color depth for a period of 3 years. With its
independently tested 9H Hardness and high solid content, the P2 Ceramic Coating system has
proven itself to be amongst the most versatile coatings on the market.
McLaren P1 Ceramic Coat Plus & Top Coat Coat Kit - 50 ml
* McLaren’s P2 Ceramic Coating can only be applied by authorized professionals.
* McLaren’s P2 Ceramic Coating products must be used in a well ventilated area.
* Always use protection gloves when applying McLaren’s P2 Ceramic Coating.
* McLaren’s P2 Ceramic Coating must be applied in a clean, dry and controlled environment. This
product cannot be applied outdoor or under direct sunlight.
* McLaren’s P2 Ceramic Coating should be applied in an ambient temperature above 5°C and no
higher than 40°C. This temperature range also applies to the surface temperature of the vehicle.For a minimum of 24 hours following the application, avoid exposing the vehicle to temperatures outside of these parameters.
Before applying your coating deconaminate your paint, polish if needed & use a panel prep spray prior to coating application.
1. On a clean application pad, carefully pour the McLaren P2 Ceramic Coating until it is wet,
but not dripping.2. When applying the McLaren P2 Ceramic Coating, always work one panel at a time. Apply the
coating on areas of 4 square foot at a time. Make sure to apply horizontally, then vertically,
for an even coverage of the surface. (cross-hatch technique).3. Once the coating is applied, the area should look wet and you should be able to see a
rainbow effect after approximately 2 - 3 minutes.4. After a minimum of 3 minutes, but not exceeding 5 minutes, when you see the rainbow
effect appear, gently buff the areas that have been coated until a uniform and streak free
appearance is achieved on the surface.5. Repeat the process on the remaining areas of the vehicle to be coated.
6. Once the first coat is applied on all the desired surfaces, let the product sit between 30
minutes to an hour.7. Following the panel order used during the application of the first coat, apply a second coat
on all the previously coated surfaces.8. Let the product dry for a minimum of two hours before delivering the vehicle.
9. The total curing time of the McLaren P2 Ceramic Coating is 72 hours. During this period, we
recommend not washing the car and avoiding exposing it to any chemicals.
