top of page

MAJOR FEATURES

  • UNIQUE, NEW FLUORO POLYSILAZANE TECHNOLOGY
  • SMOOTH AND VERY QUICK APPLICATION
  • LAYER-ABLE IF DESIRED
  • OUTDOOR APPLICATION FRIENDLY

 

UPGRADES OVER OLD MOHS

  • OVER 100% MORE DURABILITY
  • ONE LAYER APPLICATION INSTEAD OF 2 OR 3!
  • EXTREME BEADING AND RESISTANCE
  • EASY & SMOOTH WIPE OFF UP TO 5 MINUTES AFTER APPLICATION

 

Durability is one of the most salient merits of the product. It is able to maintain 80% of its original hydrophobic properties and to last on the paint throughout a period of at least 18 months, thus being a guarantor of optimum car protection against environmental factors and exploitation conditions. If compared with waxes, even the top-performing ones, it lasts three times longer.

 

BOX CONTAINS:

  • Q2 MOHS evo 
  • Q2M CURE 100ML
  • MANUAL
  • APPLICATOR
  • 4 SUEDE CLOTHS
  • FACEMASK

 

THE HARDEST COATING EVER DEVELOPED

Q² Mohs is the hardest automotive paint coating available to a wide range of users. Given the average automotive paint hardness, which lies within the range of 3-4H according to the pencil hardness scale, Q² Mohs adds a further 3H, which makes the paint extremely resistant to scratches. The extraordinary hardness of the coating preserves the effects achieved during the paint correction and is synonymous with a much slower paint degradation during maintenance.

 

THICK AND BARELY SHRINKING

As opposed to the majority of coatings present on the market, Q² Mohs demonstrates the lowest shrinking parameters. Whereas most coatings shrink from 0.2 up to 0.03 microns, the shrinking of Q² Mohs does not exceed the level of 5%, while its thickness – 0.2 microns as registered just after application, drops to 0.19 when fully dried. Traditional protective products such as wax or polymers do not display any measurable thickness whatsoever

 

DURABILITY:     ★★★★✰

GLOSS:     ★★★★★

BEADING:     ★★★★✰

HARDNESS:     ★★★★★

SELF-CLEANING:     ★★★★✰

 

Gyeon Q² Mohs EVO - Full Kit

PriceFrom C$117.00
    • CONSUMPTION: 15ml~20ml per layer

    • HARDNESS: 9H

    • CONTACT ANGLE: >105'

    • PH TOLERANCE: 2-11

    • DURABILITY: 1 LAYER: UP TO 36 MONTHS / 40KKM
      2 LAYERS: UP TO 48 MONTHS / 50KKM

  • Before you start applying make sure that the surface is oil free and completely dry. It is recommended to wash the car with Q²M Bathe, use Q²M Iron and Q²M Tar to remove impurities and degrease with Q²M Prep. Skin protection recommended. Work in a well-ventilated area. Store in a dark, dry and cool place. Keep out of reach of children. Avoid applying in direct sunlight.

Others Also Viewed

bottom of page