The Gtechniq HALO v2 Flexible Film Coating allows you to protect your PPF or vinyl wrap with ease! When protecting your paint there are many different options based on your needs. Some people love the looks of a wax or a sealant, while others reach for a coating for extreme durability and protection. Gtechniq has taken popular coating technology and reformulated it, especially for PPF and vinyl wraps!
Halo is a chemically bonding, ultra-dense, but flexible film. Once applied, HALO protects your wrap from dirt, grime, and anything else your car is exposed to on a daily basis for 18-24 months. Don't take our word for it though, Rob Earle, the Gtechniq managing director who heads up product development said, "The density of the coating and it's low surface energy improve dirt and water repellency of your PPF or vinyl. It also helps to prevent staining from dirt ingression, as well as reducing yellowing caused by UV rays. It's a win, win product that keeps the PPF in a much better condition and makes it much easier for people to keep their car clean following PPF application."
With rigorous real-world testing, Gtechniq has found that HALO is compatible with various types of gloss, matte, and satin vinyl and PPF. If you are looking to protect your wraps, reach for Gtechniq HALO Flexible Film Coating!
V1 vs V2:
- Increased film compatibility (can be applied to a wide array of new films and vinyl's including new hydrophobic films)
- 5% increase in durability. This is based on a single layer application of v2 vs. two layers of v1
- Increased hydrophobic performance. +11% on initial water contact angle (110 degrees)
Gtechniq Halo V2 Flexible Film Coating
-
Shake bottle well and wear gloves
-
To apply HALO, your vehicle must be indoors and remain indoors, for at least 12 hours after the coating has been applied. For best results, good lighting is essential
-
If applying to previously installed film, wash and decontaminate the vehicle with Gtechniq W5 Citrus All Purpose Cleaner and W6 Iron and General Fallout Remover
-
Spray a 30% dilution of isopropyl alcohol (IPA) on to a Gtechniq MF1 ZeroR Microfibre Buff Cloth
-
With your surface fully cooled, buff to remove any fingerprints or other surface contaminants. This process ensures you get the maximum number of chemical bonds between HALO and the film or vinyl
-
Apply HALO evenly on the application pad and set the bottle aside
-
Apply with applicator provided in overlapping strokes to an area roughly 2’x2’, or work to the bodylines of the vehicle
-
After coating a panel remove residue with an MF1 cloth. Always remove from further than you have applied, working from the outside in
-
Once applied carry out a final check with an MF1 cloth and a bright but diffused light source – this will ensure no residue remains on the surface. Allow the coating to cure for at least one hour and repeat the application process so that all film and vinyl is coated with two layers of HALO
-
An unopened bottle of HALO has a 12 month shelf life from the time of purchase
-
Store in a cool/dry place, out of direct sunlight
-
Use within 3 months of opening
-
