top of page
CarPro Dlite
CQUARTZ DLight Anti-UV Coating 50ml 
 
The Ultimate UV Protection for Your Vehicle’s Plastic Surfaces.
 
Unlock unheard of UV protection that lasts with CQUARTZ DLight by CARPRO. This groundbreaking ceramic coating is engineered to shield your headlights, paint protection film (PPF), and plastics from the harshest UV rays. With DLight, you can ensure your vehicle maintains its pristine appearance, no matter the environment.
 
This cutting-edge formula combines advanced UV absorbers and light stabilizers to effectively block harmful UVA and UVB rays across a spectrum of 260nm to 360nm, protecting against yellowing, fading, and cracking for a long-lasting, pristine look. Enjoy 3 years of powerful UV protection, as DLight not only preserves clarity but also maintains gloss and prevents discoloration, ensuring your surfaces stay vibrant.
 
Designed to enhance the beauty of your vehicle, DLight provides a stunning, transparent finish that revitalizes headlights and plastic trims. Its simple application process makes achieving professional-grade results easier than ever. Plus, DLight can be used as a top coat over existing coatings, amplifying UV protection, slickness, and durability, especially in high-UV and hot climates.
 
With CQUARTZ DLight, you’re not just applying a coating; you’re ensuring the long-term care of your vehicle. No other ceramic coating rivals DLight’s ability to keep your vehicle looking new and vibrant. Don’t compromise on quality—experience the exceptional benefits of CQUARTZ DLight and safeguard your vehicle’s surfaces against the elements! Checkout our Q&A at the bottom of this page or email us if you don't find your question there! 
 
  • Unmatched UV Defense: Our cutting-edge formula combines advanced UV absorbers and light stabilizers to effectively block harmful UVA and UVB rays across a spectrum of 260nm to 360nm. Protect against yellowing, fading, and cracking for a long-lasting, pristine look.
  • Extended Durability: Enjoy up to 3 years of powerful UV protection. DLight not only preserves clarity but also maintains gloss and prevents discoloration, ensuring your surfaces stay vibrant.
  • Crystal-Clear Finish: Designed to enhance the beauty of your vehicle, DLight provides a stunning, transparent finish that revitalizes headlights and plastic trims.
  • Simple Application: With an easy-to-follow application process, achieving professional-grade results has never been easier.
  • Versatile Top Coat Option: Use DLight as a top coat over existing coatings to amplify UV protection and durability, especially in high-UV and hot climates.
 
Don’t compromise on quality. Experience the exceptional benefits of CQUARTZ DLight and safeguard your vehicle’s surfaces against the elements!
 
Primary Applications:
  • Paint Protection Film.
  • Headlights.
  • Plastics.
  • Vinyl*.
  • Paint.

CarPro DLight

PriceFrom C$49.00
SOLD OUT

  • Precautions:

    • Do not apply in direct sun or on hot surface.
    • Keep away from children
    • Do not re-use 4" suede applicators.
    • Do not re-use the towels you used to buff off with on paint.
    • Wear hand protection.
    • Wear respiratory protection such as a painters mask. 

    Directions For PPF:

    • Prepare the surface to be 100% oil free and contaminant free (see precautions).
    • Wrap 4" microfiber suede around the grey side of applicator block or simply use our MF applicator. 
    • Gently shake bottle, point away from your face and slowly open.
    • Place applicator against the top of bottle, tip, and immediately drag one or two lines of product along length of applicator. 
    • Wipe evenly across 2 Sq Ft +/- section in criss cross or overlapping motion without pressure.
    • Wait 2 ~ 15 minutes (depending on temperatures, type of PPF, and flash time) before wiping.
    • Once it rainbows and you can feel a slight resistance, wipe off with a CARPRO 2Face Microfiber Towel. 
    • Be sure to remove all excess residue and only then move on with wiping off next section. 
    • NOTE: Always test ONE section first and make sure you understand application and flash times before proceeding.
    • Flip or switch out to new 4" suede every 1 ~ 2 panels or if residue becomes visible.
    • Keep out of the elements for 12~36 hours for best performance and durability. 
    • If you wish to apply an extra layer, you may do so after 1 hour from the time you began the first layer.
    • Repeat application process starting in the same panel and moving the same direction around the vehicle. 

    Preparation of plastic surfaces:

    • Make sure the surface is cool and dry. (Do not apply to hot surfaces or in direct sun.)
    • Scrub surface with an all purpose cleaner and microfiber towel.
    • Rinse while agitating with microfiber towel to remove all residue from APC.
    • Dry surface.
    • Wipe surface with CARPRO Eraser, wipe dry, and then allow plastic to evaporate 20 minutes before applying.

    Application directions for plastic:

    • Wet the applicator with a strip of DLight and spread evenly across a SMALL area at a time.
    • When applying it is VERY important to work one area in even as you go.  Do not move on until it is even.
    • Start in one corner and work out! Do not take on a huge area at once.  
    • Apply nice and even as you go. Do not try to spread too thin, but be sure to work it to an even coat in the first minute before moving to the next overlapping area. After a minute you should not be going back over that area.
    • On textured trim do not wipe it off, just be sure you apply EVENLY and fully into the texture.
    • On brand new textured plastic, use ceramic coatings at your own risk - See explanation at bottom.
    • On smooth plastic you should wipe it off before it becomes too sticky.  This results in a thinner coat that doesn’t last as long but on some smooth plastics there is not an easy way to apply it evenly.

    Directions for matte finish:

    • On matte surfaces, use ceramic coatings at your own risk - See explanation at bottom.
    • Wash thoroughly.
    • Thoroughly strip with P21S Total Auto Wash, rinse, and dry.
    • Decontaminate with IronX carefully.
    • Do NOT polish surface - NEVER polish a matte surface.
    • Wipe-down with CARPRO Eraser.
    • Let flash 1minute at 90F and use a CARPRO 2 Face Microfiber to wipe it off in a circular motion until clear. 

    Directions for Paint: 

    • Wash, decontaminate, mechanically polish and panel wipe the paint. (*Do not use any polishes with primers or fillers in them.)
    • Wrap 4" microfiber suede around the grey side of applicator block or simply use our MF applicator. 
    • Gently shake bottle, point away from your face and slowly open.
    • Place applicator against the top of bottle, tip, and immediately drag one or two lines of product along length of applicator. 
    • Wipe evenly across 2 Sq Ft +/- section in criss cross or overlapping motion without pressure.
    • Wait 5 ~ 15 minutes (depending on temperatures and flash time) before wiping.
    • Once it rainbows and you can feel a slight resistance, wipe off with a CARPRO 2Face Microfiber Towel. 
    • Be sure to remove all excess residue and only then move to the next section. 
    • NOTE: Always test ONE section first and make sure you understand application and flash times before proceeding.
    • Flip or switch out to new 4" suede every 1 ~ 2 panels or if residue becomes visible.
    • Keep out of the elements for 12~36 hours for best performance and durability. 
    • If you wish to apply an extra layer, you may do so after 1 hour from the time you began the first layer.
    • Repeat application process starting in the same panel and moving the same direction around the vehicle. 

Others Also Viewed

bottom of page